www.InternetWork.org.uk - Home Of The Blue Dash Conversion

Door Card Removal Guide
Tools Required Philips Screwdriver
Step 1 Remove the 3 fasteners. There are 2 screws (with caps on) and a black plastic trim fastener
Step 2 Remove the 4 screws on the lower edge of the door
Step 3 Remove the door release handle trim screw
Step 4 Remove the 2 black plastic fasteners.
Step 5 Remove the screw - I have seen some cars where this screw has not been fitted, so don't be worried if its not there!
Step 6 Remove the single black plastic fastener, located in the lower edge of the door card
Step 7 Remove the screw located in the door grab handle - sometimes these screws will have a cap on.
Step 8 Unclip the connector from the unit
If you have any problems, please to not hesitate to Email Me! and i will try to resolve the problem! © InternetWork 2009 V1.0

Click Here to Go back